| | RC Test Run anyone wanting to go? |  |
|
| Author | Message |
|---|
Feonix1123
Posts: 19
Join date: 2009-06-16
Age: 27
Location: Binghamton,NY
 | | Subject: RC Test Run anyone wanting to go? Mon Nov 02, 2009 5:54 pm | |
| Looking to go test rig 11/14th looking to test my rig out would like to run green/blues maybe blacks depends on if i have skids or not? anyone might be intrested thanks Dennis |
|
| | |
k_enn
Posts: 259
Join date: 2008-07-02
| | Subject: Re: RC Test Run anyone wanting to go? Mon Nov 02, 2009 8:00 pm | |
| Can't make it -- I am temporarily out of commission until I get the problem with the breaking of the bolts on the front hub resolved. k_enn |
|
| | |
Feonix1123
Posts: 19
Join date: 2009-06-16
Age: 27
Location: Binghamton,NY
| | Subject: Re: RC Test Run anyone wanting to go? Tue Nov 03, 2009 8:15 am | |
| | k_enn wrote: | Can't make it -- I am temporarily out of commission until I get the problem with the breaking of the bolts on the front hub resolved.
k_enn |
That really sucks good luck bud |
|
| | |
JeeperX
Admin
Posts: 649
Join date: 2008-07-01
Age: 39
Location: Forest Hill Md
| | Subject: Re: RC Test Run anyone wanting to go? Wed Nov 04, 2009 11:33 pm | |
| | Feonix1123 wrote: | Looking to go test rig
11/14th looking to test my rig out would like to run green/blues maybe blacks depends on if i have skids or not? anyone might be intrested thanks
Dennis |
Cannot make it that weekend, working all other weekend except the 21st when we are at the park.
| k_enn wrote: | Can't make it -- I am temporarily out of commission until I get the problem with the breaking of the bolts on the front hub resolved.
k_enn |
I thought you got that fixed |
|
| | |
k_enn
Posts: 259
Join date: 2008-07-02
| | Subject: Re: RC Test Run anyone wanting to go? Thu Nov 05, 2009 2:53 pm | |
| | JeeperX wrote: | | k_enn wrote: | Can't make it -- I am temporarily out of commission until I get the problem with the breaking of the bolts on the front hub resolved.
k_enn |
I thought you got that fixed |
I had thought the grade 12.9 would take care of it -- it didn't. I now think the problem is with the Warn manual hubs -- so I have got to replace them. Also, with four grade 12.9 bolts sheared and stuck in the wheel assembly, I need to get a new one and replace. I am sure not about to try to drill and extract them. |
|
| | |
yrflu
Posts: 170
Join date: 2009-07-20
Location: Annapolis, MD
| |
| | |
k_enn
Posts: 259
Join date: 2008-07-02
| | Subject: Re: RC Test Run anyone wanting to go? Thu Nov 05, 2009 8:04 pm | |
| | yrflu wrote: | | I would go ahead and weld the bad boy on... I bet you wont break any more bolts like that. |
Too bad that if you did that, you could not service the wheel bearings. |
|
| | |
yrflu
Posts: 170
Join date: 2009-07-20
Location: Annapolis, MD
| |
| | |
Mudslinger
Posts: 48
Join date: 2008-10-27
| | Subject: Re: RC Test Run anyone wanting to go? Fri Nov 06, 2009 10:24 am | |
| I am actually planning to be at Rausch on 11/14. I will have a couple of other Jeeps with me, however, they are pretty new jeeps so we will be staying mostly with the green and maybe some of the easier blue. You are more than welcome to join us if you want! Dennis |
|
| | |
k_enn
Posts: 259
Join date: 2008-07-02
| | Subject: Re: RC Test Run anyone wanting to go? Fri Nov 06, 2009 12:22 pm | |
| | yrflu wrote: | | k_enn wrote: | | yrflu wrote: | | I would go ahead and weld the bad boy on... I bet you wont break any more bolts like that. |
Too bad that if you did that, you could not service the wheel bearings. |
Just means that you need to get a torch to cut the welds. Very easy to do. |
True, but then you are in deep yogurt if you have to do a trail repair on the half shaft, CV or bearings. |
|
| | |
yrflu
Posts: 170
Join date: 2009-07-20
Location: Annapolis, MD
| | Subject: Re: RC Test Run anyone wanting to go? Fri Nov 06, 2009 4:15 pm | |
| |
|
| | |
| | RC Test Run anyone wanting to go? | |
|
