Alpha Omega Offroad is a 4x4 Club and Christian Ministry.
HomeHome  ­CalendarCalendar  ­FAQFAQ  ­SearchSearch  ­RegisterRegister  ­Log inLog in  
"Let us not give up meeting together, as some are in the habit of doing, but let us encourage one another - and all the more as you see the Day approaching." Heb 10:25
Post new topic   Reply to topicAlpha Omega Offroad :: OFF-ROAD TOPICS :: MODIFICATIONS, "FIX IT" Q & A, MAKE/MODELShare | 
 

 CB Question

View previous topic View next topic Go down 
AuthorMessage
Safari



Posts: 322
Join date: 2008-07-01
Age: 63
Location: Middletown, PA

PostSubject: CB Question   Mon Jun 29, 2009 5:37 pm
I have a Uniden CB (not sure of the model). There's a two position switch on the face with one unlabeled position and on position labeled "ANL." Is this an analog/digital switch, or what is it? From the time I purchased it, its been set in the "ANL" position. What is the proper position?
Back to top Go down
View user profile
chariotofmanliness



Posts: 239
Join date: 2008-12-01
Age: 42
Location: East Petersburg, PA

PostSubject: Re: CB Question   Tue Jun 30, 2009 10:28 am
that would be the "automatic noise limiter". with it in the anl side, you get less altinator whine feedback.

_________________
I work to support my Jeep. My wife says, it's an obsession, I say, it's a hobby.
Back to top Go down
View user profile
 

CB Question

View previous topic View next topic Back to top 
Page 1 of 1

Permissions of this forum:You cannot reply to topics in this forum
Alpha Omega Offroad :: OFF-ROAD TOPICS :: MODIFICATIONS, "FIX IT" Q & A, MAKE/MODEL-
Post new topic   Reply to topic